Using the Printer

Outputting to a VMB

When sending data to a virtual output tray set within the RAM DISK, make this setting from the printer driver. With this setting, data can be sent by specifying the desired virtual output tray number. It is also possible to assign a name to a virtual output tray and send data by specifying that name. (For details on this setting, please refer to the help documentation for the printer driver.)

When data is sent by specifying a virtual output tray, printing to paper is not performed at the time data is sent. Sent data accumulates in the virtual output trays of the RAM DISK. For details on printing accumulated data, please see the next item.

Print Accumulated VMB Data

This function prints VMB data accumulated in a virtual output tray.

1 Select RAM DISK mode on the printer’s Mode Select Menu and display >Print VMB data Tray. The VMB tray number will appear in the location marked by #’s below, while the VMB tray name will appear in the location marked by %’s.

>Print VMB data Tray###:%%%%%%%

2 Pressing the ENTER key will cause a ? to flash.

>Print VMB data Tray###?%%%%%%%

3

4

Each time the + or - keys are pressed, the VMB data display will change. Press the CANCEL key if you want to halt printing. The ? display will disappear.

Display the VMB data you want to print. Pressing the ENTER key will cause Processing to be displayed and the data will be printed.

53

Page 62
Image 62
HP Ci 1100 manual Outputting to a VMB, Print Accumulated VMB Data