AM Antenna
1)Identify the AM Antenna.
2)Fold the base as shown.
3)Snap the tab on the loop into the slot in the base to complete the AM Antenna assembly. Be careful not to pinch the connecting wire.
4)The finished antenna will stand upright, as shown.
5)Insert the AM Antenna plug into the AM antenna input, which is directly underneath the FM antenna input.
6)Position the AM antenna 8 inches away from AC power lines or equipment to minimize AM interference.
The AM Antenna is mildly directional, so rotate it to find the best signal for each AM station. A single position can often be found that works well with all AM stations of interest.
1) | 2) |
3) | 4) |
5)
