Dell 883933-11 Rev. E manual Option Description, Default is COM1

Connect Parameter: Options	37
Table 11 Ericom PowerTerm® TEC Connect Options, Continued
Option	Description
LocalCopy={no, yes}	Default is no.
	Yes/no option to save to the permanent registry (or saves
	the Ericom — PowerTerm® TEC settings locally after
	reboot).
Phone=<phone number>	Specifies the modem dial-up number. For serial
	connection only.
Ping={yes, no}	Default is yes.
	Yes/no option to enable ping. For non-published
	application connections, a ping (ICMP) is sent to the host
	server prior to connecting to verify that the host is
	reachable.
Port={COM1, COM2}	Default is COM1.
	Designates the connection serial port. For serial
	connection only.
Reconnect={no, yes}	Default is no.
	Yes/no option to automatically reconnect to an
	application server after a disconnection.
ReconnectSeconds=<value in	Default is 30.
seconds>	Specifies the amount of time in seconds (default is 30) to
	wait before automatic reconnection to an application
	server after a disconnection. Requires Reconnect=yes or
	1.

Resolution={default, 640x480, 800x600, 1024x768, 1280x1024, 1600x1200, <width>x<height>}

Default is default, which starts the connection using the current desktop display setting with no window frame or border.

Specifies the connection display resolution. The default value starts the connection using the current desktop display setting with no window frame or border. Arbitrary widthxheight values are accepted.

{TerminalType,	Specifies the terminal emulation type.
TerminalID,Terminal}=<emulation
type>
Termname=<terminal ID string>	Specifies the terminal identification string that is sent as a
	response when a request for identification is requested to
	terminal.
Uiconfig={menu, toolbar, status,	Opens the window with the menu, toolbar, status bar, or
buttons}	buttons.