2. Align the display assembly over the screw holes in the base of the computer.
3. Replace the four M2.5 x 5-mm screws.
4. Connect the display cable to the system board.
5. Reroute the display cable into the cable channel.
6. Replace the hinge cover (see Replacing the Hinge Cover).
7. If a Mini-Card is installed, connect the antenna cables to the card (see Mini-Card). If one is not installed, tuck the antenna cables into their secured
location.
8. Replace the Mini-Card cover.
Display Bezel
NOTE: The left hinge assembly has a small tab that you must first insert underneath the edge of the palm rest.
1
tab
NOTE: When you replace the four screws, ensure that you tighten them in the order indicated by the labels "1," "2," "3," and "4" on the display hinges.