OptiPlex 980 Technical Guidebook Page 24
Communications - Integrated LAN
NOTE: MT supports full height card, DT supports low profile card or full height card with optional riser. SFF supports low
profile card.

Integrated Intel® 82578 Gigabit Ethernet LAN 10/100/1000

MT

DT

SFF

External Connector Type
RJ45
Data Rates supported
10/100/1000 Mbps
Controller Details
Controller bus architecture (example PCIe 1.0a x1)
Intel Gigabit LAN Connect Interface
(GLCI) and LAN Connect Interface (LCI)
Integrated memory
N/A
Data transfer mode (example Bus-Master DMA)
N/A
Power consumption (full operation per data rate connection speed)
781mW (Max.)
Power consumption (standby operation) with WOL enabled
200mW (Max, 100Mb)
66mW (Max, 10Mb)
Power consumption (standby operation) with WOL disabled in BIOS
0mW (Max)
Power consumption (standby operation) with WOL disabled with driver
47mW (Max)
IEEE standards compliance (example 802.1P)
802.3
Hardware Certifications (example FCC, B, GS mark…)
N/A
Boot ROM Support
EEPROM (located in SPI)
Network Transfer Mode (example Full Duplex, Half Duplex)
Network Transfer Rate (example 10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
10 Mb (full/half-duplex)
100 Mb (full/half-duplex)
1000 Mb (full-duplex)
Environmental
Operating temperature
0° C to 85° C (32° F to 185° F)
Operating humidity
20% to 80% (non-condensing)
Operating System Driver Support
Windows XP 32-Bit, Windows Vista
32-bit, Windows Vista 64-bit, Win7 32-bit,
Win7 64Bit.
Manageability (examples WOL, PXE..)
WOL, PXE 2.1
Management Capabilities Alerting (examples ASF 2.0 AMT…)
iAMT6.0
1 This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet
server and network infrastructure is required.