OptiPlex 980 Technical Guidebook Page 25
Communications – Networking Card
NOTE: MT supports full height card, DT supports low profile card or full height card with optional riser. SFF supports low
profile card.
Broadcom 5722 NetXtreme 10/100/1000 PCIe Gigabit1 Networking
Card
MT
DT
SFF
Connector Type
RJ45
Data Rates supported
10/100/1000 Mbps Half/Full duplex
Controller Details
Controller bus architecture (example PCIe 1.0a x1)
PCIe 1.0a x1
Integrated memory
40KB
Data transfer mode (example Bus-Master DMA)
Bus-Master DMA
Power consumption (full operation per data rate connection speed)
1.41W (427mA @ +3.3V)
Power consumption (standby operation)
Less than 300mW
IEEE standards compliance (example 802.1P)
802.3z, 802.3x, Dynamic 802.3ad,
802.3 p, 802.1Q
Hardware Certifications (example FCC, B, GS mark…)
FCC B, VCCI B, CE
Boot ROM Support
No
Network Transfer Mode (example Full Duplex, Half Duplex)
Full Duplex/Half Duplex
Network Transfer Rate (example 10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
10BASE-T (full-duplex - 20Mbps,
half-duplex – 10Mbps)*
100BASE-T (full-duplex – 200Mbps,
half-duplex - 100Mbps)*
1000BASE-T (full-duplex - 2000Mbps,
half-duplex – 1000Mbps)*
* Depends on the system environment.
Environmental
Operating temperature
0° C to 55° C (32° F to 131° F)
Operating humidity
5% ~ 85% (non-condensing)
Operating System Driver Support
Windows XP 32-bit, Windows Vista
32-bit, Windows Vista 64-bit, Win7 32-bit,
Win7 64Bit.
Manageability (examples WOL, PXE..)
WOL, PXE2.1, ACPI, CIM, SNMP
Management Capabilities Alerting (examples ASF 2.0 AMT…)
None
1 This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet
server and network infrastructure is required.