To replace the display latch, you must replace the whole bezel.
1. Remove the battery.
2. Remove the hard drive.
3. Open the display 180 degrees, and remove the six rubber screw covers and the six M2 x 4-mm screws that secure the
bezel.
Bezel Removal
1 bezel
2display latch
3M2 x 4-mm screw (6)
4display assembly
4. Use a small flat-blade screwdriver to carefully pry around the perimeter of the bezel until the bezel separates from the
display assembly.
5. Install the new bezel.
Back to Contents Page