Dell D610 manual Removing the Palm Rest Installing the Palm Rest, Back to Contents Page

Back to Contents Page

Palm Rest

Dell™ Latitude™ D610 Service Manual

Removing the Palm Rest

Installing the Palm Rest

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

Removing the Palm Rest

1.Follow the instructions in "Preparing to Work Inside the Computer."

2.Remove the center control cover (see "Removing the Center Control Cover").

3.Remove the keyboard (see "Removing the Keyboard").

4.Remove the display assembly (see "Removing the Display Assembly").

5.Remove the two M2.5 x 5-mm screws from the top of the palm rest.

6.Disconnect the touch pad cable from the connector on the system board.

1touch pad connector

2screws (2) at top of palm rest

3palm rest

4computer base

7.Turn the computer over and remove the thirteen M2.5 x 8-mm screws.