Dell dell power vault md storage arrays information update owner manual

Dell PowerVault MD Storage Arrays—Information Update

NOTE: Information in this document applies to Dell PowerVault MD3200, PowerVault

MD3220, PowerVault MD3200i, PowerVault MD3220i, PowerVault MD3600i,

PowerVault MD3620i, PowerVault MD3600f, and PowerVault MD3620f systems.

This document provides additional information that is not included in the

PowerVault MD customer documentation. Issues described in this document

may affect the installation, configuration, or operation of your PowerVault MD

storage array. Information provided in the document must be reviewed before

using your new storage array or upgrading your array software, firmware, or host

operating system.

The PowerVault MD series documentation set at support.dell.com/manuals

provides information to setup, configure, and use your system.

The Dell PowerVault MD Series Resource Media provides a single installation for

all PowerVault MD storage arrays. Platform-specific media is no longer

distributed for each PowerVault MD storage array. Use the consolidated Dell

PowerVault MD Series Resource Media (version 3.0.0.18 or later) to install the

PowerVault MD Storage Manager and any media-based PowerVault MD storage

array management application. All RAID controllers in your system must use the

latest controller firmware versions as shown in the Support Matrix at

support.dell.com/manuals.

For information on updating your RAID controller firmware, see the

system-specific Owner's Manual at support.dell.com/manuals.

2011 - 10