Dell E1909W Operating the Monitor, Using the Front Panel, Using the Tilt, Front panel Button

Back to Contents Page

Operating the Monitor

Dell™ E1909W Flat Panel Monitor User's Guide

Using the Front Panel Controls

Using the On-Screen Display (OSD) Menu

Setting the Optimal Resolution

Using the Dell Soundbar (Optional)

Using the Tilt

Using the Front Panel

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.

	Front panel Button		Description
A		Use the MENU button to launch the on-screen display (OSD) and select the OSD Menu. See Accessing the Menu System.
	Menu
B		Use this button to directly access the "Brightness/Contrast" menu or to increase the values of the selected menu option.
	Brightness&Contrast /Adjust
	UP
C		Use Auto Adjust to activate automatic setup/adjustment or to decrease the values of the selected menu option. The following
		dialog appears on a black screen as the monitor self-adjusts to the current input:
	Automatic Adjust /Adjust
	Down
		Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further
		tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
		NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
D		Use this button to select the input source or select an OSD menu option. Use the Input source button to select one of the two
		different video signals that may be connected to your monitor:
		•	VGA input
	Input Source Select/Select	•	DVI-D input