Dell FE100, FL100 manual Peripherals for PowerEdge 6100 Cluster Nodes

Peripherals for PowerEdge 6100 Cluster Nodes

The following list provides PCI slot assignment information for the system’s PCI buses and HBAs.

•

•

PCI buses

—PCI bus 0: PCI slots 1 through 3 are 32-bit, 33-MHz slots.

—PCI bus 1: PCI slots 4 through 6 are 32-bit, 33-MHz slots. HBAs

—Dell recommends installing the HBAs on separate PCI buses to balance the load on the system.

Peripherals for PowerEdge 6300 and 6350 Cluster Nodes

The following list provides PCI slot assignment information for the system’s PCI buses, HBAs, and the DRAC 2.

•

•

PCI buses

—PCI bus 0: PCI slots 1 through 3 are 32-bit, 33-MHz.

—PCI bus 1: PCI slots 4 through 7 are 64-bit, 33-MHz. HBAs

—Dell recommends installing the HBAs on separate PCI buses to balance the load on the system.

•DRAC 2

—If you are currently using a DRAC 2 or plan to use one in the future, install it in PCI slot 3.

Peripherals for PowerEdge 6400 and 6450 Cluster Nodes

The following list provides PCI slot assignment information for the system’s PCI buses, HBAs, and the DRAC 2.

•

•

PCI buses

—PCI bus 0: PCI slot 1 is 32-bit, 33-MHz.

—PCI bus 1: PCI slots 2 through 5 are 64-bit, 33-MHz.

—PCI bus 2: PCI slots 6 and 7 are 64-bit, 33/66-MHz. HBAs

—Dell recommends installing the HBAs on separate PCI buses (PCI buses 2 and 3) to balance the load on the system.

1-8 Dell PowerEdge Cluster FE100/FL100 Platform Guide