Back to Contents Page
Display
Dell™ XPS™ L501X Service Manual
Display Assembly
Display Bezel
Display Panel
Display Cable
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.
Display Assembly
Removing the Display Assembly
1.Follow the instructions in Before You Begin.
2.Remove the battery (see Removing the Battery).
3.Remove the module cover (see Removing the Module Cover).
4.Remove the memory module(s) (see Removing the Memory Module(s)).
5.Disconnect the antenna cables from the
6.Note the routing of the
7.Remove the two screws that secure the display assembly to the base cover.
1 | antenna cables | 2 | base cover |
|
|
|
|
CAUTION: Be extremely careful when opening the display to prevent damaging the display assembly.
