9.Turn the computer over and open the display as far as possible.
10.Remove the keyboard (see Removing the Keyboard).
11.Pull the
12.Disconnect the digitizer board cable from the
NOTE: The digitizer board is optional and may not be present in your computer.
13. Loosen the captive screw that secures the display grounding cable.
1
3
captive screw | 2 | display cable connector |
|
|
|
digitizer board cable |
|
|
|
|
|
14.Note the routing of the display cable and remove the cable from the routing guides.
15.Note the routing of the
16.Gently pull the antenna cables up from the bottom of the computer through the slot on the top cover.
17.Remove the four screws that secure the display assembly to the computer base.
1
3
5
display assembly | 2 | screws (4) |
display cable | 4 | top cover |
|
|
|
antenna cables |
|
|
|
|
|
18. Lift the display assembly off the computer base.
