3.Use the alignment posts on the display back cover to place the camera module in position.

4.Connect the camera cable to the connector on the camera module.

5.Replace the display bezel (see Replacing the Display Bezel).

6.Replace the display assembly (see Replacing the Display Assembly).

7.Replace the keyboard (see Replacing the Keyboard).

8.Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).

9.Replace the memory module(s) (see Replacing the Memory Module(s)).

10.Replace the module cover (see Replacing the Module Cover).

11.Replace the battery (see Replacing the Battery).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

Back to Contents Page

Page 7
Image 7
Dell L502X manual Back to Contents