Dell M1210 manual Removing a Media Memory Card

Models: M1210

1 192
Download 192 pages 28.34 Kb
Page 74
Image 74

To install a media memory card:

1Hold the card with the top side of the card facing up.

2Slide the card into the slot until the card is completely seated in its connector.

If you encounter too much resistance, do not force the card. Check the card orientation and try again.

The computer recognizes the media memory card and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the CD that came with the media memory card, if applicable.

Removing a Media Memory Card

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: Use the media memory card configuration utility (click the icon in the taskbar) to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration utility, you could lose data.

Press the card in to release it from the card reader so that it is partially ejected, and remove the card.

74

Using Cards

Page 74
Image 74
Dell M1210 manual Removing a Media Memory Card