Procedure

1Using the pull-tab, disconnect the display cable from the connector on the system board.

2Disconnect the logo-board cable from the connector on the system board.

3Gently peel the display cable and the logo-board cable from the system board.

4Remove the screws that secure the display assembly to the computer base.

5Gently slide the WirelessHD (optional) and mini-card antenna cables out through the slot on the computer base.

6Lift the display assembly off the computer.

1

2

3

 

4

 

 

1

display assembly

2

screws (4)

3

display cable

4

logo-board cable

Display Assembly

75

Page 73
Image 73
Dell M14XR2 owner manual Display assembly Screws Display cable