Dell M2800 owner manual Post Behavior

Option	Description
Wake on LAN/WLAN	This option allows the computer to power up from the off state when
	triggered by a special LAN signal. Wake-up from the Standby state is
	unaffected by this setting and must be enabled in the operating system.
	This feature only works when the computer is connected to AC power
	supply.
	• Disabled - Does not allow the system to power on by special LAN
		signals when it receives a wake-up signal from the LAN or wireless
		LAN. (Default Setting)
	• LAN Only - Allows the system to be powered on by special LAN
		signals.
	•	WLAN Only
	•	LAN or WLAN
Block Sleep	Allows you to block the computer from entering into the sleep state.
	Option is disabled by default.
	•	Block Sleep (S3)
Peak Shift	Allows you to set the peak shift. The option is disabled by default.
Advanced Battery Charge	Allows you to enable the advance battery charge mode. The option is
Configuration	disabled by default.
Primary Battery Charge	Allows you to define how to use the battery charge, when AC is plugged
Configuration	in. The options are:
	•	Adaptive (Default Setting)
	•	Standard
	•	Express Charge
	•	Primarily AC use
	•	Custom
Battery Slice Charge	Allows you to define the how to charge the battery. The options are:
Configuration	•	Standard Charge
	• Express Charge (Default Setting)
Module Bay Battery Charge	Allows you to define how to charge the battery at standard rate. The
Configuration	options are:
	•	Standard
	• Express Charge (Default Setting)
		NOTE: Disable the Advanced Battery Charge Mode in order to
		enable this opiton.
Intel(R) Smart Connect	Allows you to enable the system to sense nearby wireless connection
Technology	while the system is asleep. The option is disabled by default.
Table 9. POST Behavior
Option	Description
Adapter Warnings	Allows you to activate the adapter warning messages when certain
	power adapters are used. The option is enabled by default.

60