Back to Contents Page
Microprocessor Thermal-Cooling Assembly
Dell Precision™ M70 Service Manual
Removing the Microprocessor Thermal-Cooling Assembly
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
1.Follow the instructions in "Preparing to Work Inside the Computer."
2.Remove the display assembly.
3.Remove the keyboard.
4.Remove the palm rest.
5.Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the microprocessor
1captive screws (4)
2microprocessor thermal- cooling assembly
6.Lift the microprocessor
