4.If the array still shows an Unresponsive status, contact Dell.
Initial Setup Tasks
Enter the context of your task here (optional). This is where introductory content goes.
1.The name of the first storage array found is displayed in the Devices tab of the EMW. To see a list of all storage arrays found on the local network, expand the discovered storage arrays tab in the Device pane of the EMW.
2.The default name for a newly installed MDxxxxx series storage array is Unnamed. If another name is displayed in MDSM, click the down arrow next to the name and click Unnamed in the
3.
4.Click Perform Initial Setup Tasks to see an outline and links to the remaining postinstallation tasks. The array is now ready to be configured.
See the Owner’s Manual for information about each task and to perform the necessary configuration steps.
The following table lists the recommended configuration steps that can be accomplished using the Owner’s Manual.
NOTE: Before configuring the storage array, check the status icons on the Device pane to ensure that the enclosures in the storage array are in an Optimal status. For more information on the status icons, see the Owner’s Manual at support.dell.com/manuals.
Table 1. Initial Setup Tasks Dialog Box
Task | Purpose |
|
|
Rename the storage array | To provide a more meaningful name than the |
| |
Set a storage array password | To restrict unauthorized access. MDSM may ask for |
| a password before changing the configuration or |
| performing a destructive operation |
Set up alert notifications Set up email alerts
Set up SNMP alerts
To notify individuals (by email) and/or storage enterprise management consoles, such as Dell Management Console, (by SNMP) when a storage array component degrades or fails, or an adverse environmental condition occurs.
Configure a storage array | To create virtual disks and map them to hosts. |
26