Dell MVT01, JU892 manual One 420-Wpower supply

•Standard baseboard management controller with serial access.

•Back-panel connectors include PS/2 mouse and keyboard, serial, video, two USB connectors, and one NIC connector.

•One 3.5-inch CD, DVD, or combination CD-RW/DVD in a peripheral drive bay.

NOTE: DVD devices are data only.

•Support for the following internal hard-drive configurations:

–Up to four internal, 1-inch, SATA hard drives with integrated drive controllers.

–Up to four internal, 1-inch, Serial-Attached SCSI (SAS) hard drives with an optional SAS controller card or backplane.

NOTE: Hot-plug capability is supported only when SATA or SAS drives are connected to the optional SAS controller card or backplane.

•Optional Dell Remote Access Card (DRAC 4) for remote systems management. This option requires a dedicated PCI slot.

•One 420-W power supply.

For more information about specific features, see “Technical Specifications” on page 11.

The following software is included with your system:

•A System Setup program for quickly viewing and changing system configuration information. For more information on this program, see “Using the System Setup Program” in the Hardware Owner’s Manual.

•Enhanced security features, including a system password and a setup password, available through the System Setup program.

•System diagnostics for evaluating system components and devices. For information about using the system diagnostics, see “Running the System Diagnostics” in your Hardware Owner’s Manual.

•Video drivers for displaying many popular application programs in high- resolution modes.

•SATA or SAS device drivers that allow the operating system to communicate with devices attached to the integrated SATA or SAS subsystem. For more information about these drivers, see “Installing Drives” in your Hardware Owner’s Manual.

•Systems management software and documentation CDs.

6

Getting Started With Your System