Dell P41G002 owner manual Set Asset Tag This field displays your systems asset tag. If

SATA Operation	Change the SATA controller	Default: AHCI
	mode to either ATA or AHCI.
Adapter Warnings	Enable or disable the Adapter	Default: Enable
	Warnings.
Function Key Behavior	Specifies the behavior of the	Default: Function key
	function key <Fn>.
Battery Health	Displays a message about the
	battery health.
Miscellaneous Devices	These fields let you enable or
	disable various on-board devices.

Security

Table 4. Security

Set Asset Tag	This field displays your system's asset tag. If the
	asset tag is not already set, this field can be used to
	enter it.
Set Admin Password	Allows you to change or delete the administrator
	password.
Set System Password	Allows you to change or delete the system
	password.
Set HDD Password	Allows you to set a password on the computer's
	internal hard drive (HDD).
Password Change	Allows you to change the security password.
Password Bypass	Allows you to bypass the system password and the
	internal HDD password prompts during a system
	restart/resume from hibernate state.
Boot
Table 5. Boot
Boot Priority Order	Specifies the order of different devices in which the
	computer will boot through at start up.
Legacy Boot Option	Allows you to load legacy option. (Default:
	Enabled)
Secure Boot	Species if the UEFI secure boot option (Default:
	Disabled)
Add Boot Option	Allows the user to add an additional boot device.
Delete Boot Option	Allows the user to remove an existing boot device
	from the boot order.

Exit

This section allows you to save, discard, and load default settings before exiting from System Setup.

36