Installing the Heatsink Assembly

1.Insert the heatsink and tighten the screws to secure it to the system board.

2.Connect the system fan’s cable to the system board.

3.Install:

a.system board

b.palmrest assembly

c.keyboard

d.memory module

e.hard drive

f.WLAN card

g.access panel

h.optical disk-drive

i.battery

4.Follow the procedures in After Working Inside Your computer.

Removing the Power Connector

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.battery

b.optical disk-drive

c.access panel

d.hard drive

e.memory module

f.keyboard

g.palmrest assembly

3.Perform the following steps as shown in the illustration:

a.Disconnect the power connector from the system board [1].

29

Page 29
Image 29
Dell P52G owner manual Installing the Heatsink Assembly, Removing the Power Connector