Installing the Input/Output (I/O) Board

1.Insert the I/O board into the chassis.

2.Connect the I/O board cable to the system board.

3.Install:

a.palmrest assembly

b.keyboard

c.memory module

d.hard drive

e.WLAN card

f.access panel

g.optical disk-drive

h.battery

4.Follow the procedures in After Working Inside Your computer.

Removing the Speakers

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.battery

b.optical– disk drive

c.access panel

d.hard drive

e.memory module

f.keyboard

g.palmrest assembly

3.Disconnect the speaker cables from the system board (1) and release the speaker cables from the retaining tabs (2).

20

Page 20
Image 20
Dell P52G owner manual Installing the Input/Output I/O Board, Removing the Speakers