Dell R320 owner manual Removing Memory Modules, Ejecting The Memory Module

System Capacity (in	DIMM Size (in GB)	Number of DIMMs	DIMM Rank,		DIMM Slot Population
GB)			Organization, and
			Frequency
			2R, x4, 1600 MT/s
48	16	3	2R, x4, 1333 MT/s,		A1, A2, A3
			2R, x4, 1600	MT/s
96	16	6	2R, x4, 1333	MT/s,	A1, A2, A3, A4, A5, A6
			2R, x4, 1600	MT/s
128	32	4	4R x4, 1066 MT/s		A1, A2, A3, A4
192	32	6	4R x4, 1066 MT/s		A1, A2, A3, A4, A5, A6

Removing Memory Modules

WARNING: The memory modules are hot to the touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components or metallic contacts on the memory module.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

CAUTION: To ensure proper system cooling, memory-module blanks must be installed in any memory socket that is not occupied. Remove memory-module blanks only if you intend to install memory modules in those sockets.

1.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.

2.Open the system.

3.Remove the cooling shroud.

4.Locate the appropriate memory-module socket(s).

5.To release the memory-module blank from the socket, simultaneously press the ejectors on both ends of the memory module socket.

CAUTION: Handle each memory module only on the card edges, making sure not to touch the middle of the memory module or metallic contacts. To avoid damaging the memory module, handle only one memory module at a time.

Figure 16. Ejecting The Memory Module

47