Dell S2409W appendix Resolution, Video Supported Modes, Preset Display Modes, Electrical

Pixel pitch	0.276 mm
Viewing angle	160° (vertical) typical, 170° (horizontal) typical
Luminance output	300 CD/m ²(typical)
Contrast ratio	1000 to 1 (typical)
Faceplate coating	Antiglare with hard-coating 3H
Backlight	CCFL edgelight system
Response Time	5 ms typical
Color Gamut	85%*

* S2409W Color Gamut (Typical) is based on CIE1976 (85%) and CIE1931 (72%).

Resolution

Horizontal scan range	30 kHz to 83 kHz (automatic)
Vertical scan range	50 Hz to 76 Hz (automatic)
Optimal preset resolution	1920 x 1080 at 60 Hz
Highest preset resolution	1920 x 1080 at 60 Hz

Video Supported Modes

Video display capabilities (DVI playback)	480i/480p/576i/576p/720p/1080i/1080p (Supports HDCP)
Video display capabilities (HDMI playback)	480i/480p/576i/576p/720p/1080i/1080p

Preset Display Modes

Display Mode	Horizontal	Vertical	Pixel Clock	Sync Polarity
	Frequency	Frequency (Hz)	(MHz)	(Horizontal/Vertical)
	(kHz)
VGA, 720 x 400	31.5	70.1	28.3	-/+
VGA, 640 x 480	31.5	59.9	25.2	-/-
VESA, 640 x 480	37.5	75.0	31.5	-/-
VESA, 800 x 600	37.9	60.3	40.0	+/+
VESA, 800 x 600	46.9	75.0	49.5	+/+
VESA, 1024 x 768	48.4	60.0	65.0	-/-
VESA, 1024 x 768	60.0	75.0	78.8	+/+
VESA, 1152 x 864	67.5	75.0	108.0	+/+
VESA, 1280 x 1024	64.0	60.0	108.0	+/+
VESA, 1280 x 1024	80.0	75.0	135.0	+/+
VESA, 1920 x 1080	67.2	60.0	173.0	-/+
VESA, 1920 x 1080	66.6	59.9	138.5	+/-

Electrical

	Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
	impedance
Video input signals	Digital DVI-D TMDS, 600mV for each differential line, positive
	polarity at 50 ohm input impedance
	HDMI, 600mV for each differential line, 100 ohm input
	impedance per differential pair
Synchronization input signals	Separate horizontal and vertical synchronizations, polarity-free
	TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current	100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
Inrush iso surge current	120 V: 30 A (Max.)
	240 V: 60 A (Max.)