Dell ST2010B appendix Wide Mode

Wide Mode Adjusts the image ratio as 1:1, Aspect or full screen.

NOTE: Wide Mode adjustment is not required at maximum preset resolution 1600 x 900.

Horizontal Position	Use the		or	button to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Vertical Position	Use the		or	button to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
Sharpness	This feature can make the image look sharper or softer. Use				or	to adjust the sharpness from '0' to '100' .
Pixel Clock	The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through
	the main OSD menu, by selecting 'Image Settings'.
	Use	or		button to adjust for best image quality.
Phase	If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
	(fine), again.
	NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Reset Display	Resets the display settings to the original factory settings.
Settings
Back
	Press		to go back to the main menu.
Other Settings	Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on
	screen, and so on.

Language	Language option to set the OSD display to one of six languages (English, Espanol, Francais, Deutsch, Simplified chinese or
	Japanese).
Menu Transparency	Select this option to change the menu transparency by pressing	or	(Minimum: 0 ~ Maximum: 100).