Dell T06G Removing the Micro-SD card, Installing the Micro-SD Card Tray, Removing the Battery

NOTE: It is recommended that you turn down the volume level before plugging the headphone, and then adjust to a comfortable level. Sudden exposure to loud sounds can cause hearing damage.

Removing the Micro-SD card

CAUTION: Removing the Micro-SD card when transferring data may cause data loss or result in application errors. Make sure your tablet has finished all save operations to the Micro-SD card.

1.Enter the Desktop mode. Touch Safely Remove Hardware in the notification area at the bottom-right corner of the screen.

NOTE: If you don’t see Safely Remove Hardware , touch Show Hidden Icons to display all icons in the notification area.

2.Touch Eject SD Memory Card. A message appears confirming that the Micro-SD card can be safely removed. If a warning message appears stating the Micro-SD card cannot be removed, ensure all data transfers involving the Micro-SD card are complete.

3.Insert the tip of a small bent paperclip into the small hole on the micro-SD slot cover.

4.Push the tip all the way into the hole until the micro-SD tray ejects. Pull the micro-SD card tray out.

5.Remove the micro-SD card from the tray.

Installing the Micro-SD Card Tray

1.Place the SD card on the SD card tray.

2.Push the SD card tray to its place until it clicks into place.

Removing the Battery

1.Follow the procedures in Before Working Inside Your Tablet.

2.Remove the base cover.

3.Perform the following steps:

17