Dell U2311H, U2211H appendix Setting Up the Monitor, Attaching the Stand, Connecting Your Monitor

Models: U2311H U2211H

1 38
Download 38 pages 12.53 Kb
Page 30
Image 30
Setting Up the Monitor

Back to Contents Page

Setting Up the Monitor

Dell™ U2211H / U2311H Monitor User's Guide

Attaching the Stand

Connecting the Monitor

Organizing Your Cables

Attaching the Soundbar (optional)

Removing the Stand

Wall Mounting (Optional)

Attaching the Stand

NOTE: The stand is detached when the monitor is shipped from the factory.

NOTE: This is applicable for a monitor with a stand. When other stand is bought, please refer to the respective stand setup guide for set up instructions.

To attach the monitor stand:

1.Remove the cover and place the monitor on it.

2.Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.

3.Press the stand till it snaps into its place.

Connecting Your Monitor

Attaching the Stand WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.

To connect your monitor to the computer:

1.Turn off your computer and disconnect the power cable.

Connect the blue (VGA) cable from your monitor to your computer.

NOTE: If your computer supports a white DVI connector, unscrew and detach the blue (VGA) cable from the monitor and then connect the White DVI cable to the monitor and the white DVI connector on your computer.

Page 30
Image 30
Dell U2311H, U2211H appendix Setting Up the Monitor, Attaching the Stand, Connecting Your Monitor, Wall Mounting Optional