System Configuration
Wake On LAN | Allows the computer to be remotely | Default: Enabled |
| turned on. This feature is enabled only |
|
| when the AC adapter is connected. |
|
Post Behaviour |
|
|
Adapter Warnings | Enables or disables adapter warnings. | Default: Enabled |
Fast Boot | Allows the System Setup to skip | Default: Enabled |
| certain tests during power on self test |
|
| (POST) which decreases the amount |
|
| of time needed to boot the computer. |
|
Keyboard Click | Enable or disable the keyboard sound. | Default: Disabled |
Battery Health |
|
|
Primary Battery | Displays the health of the battery |
|
Security
Service Tag | Displays the current service tag of the computer. |
Asset Tag | Displays the asset tag. |
Unlock Setup Status | Specifies whether a setup password has been assigned. |
Admin Password Status | Specifies whether an admin password has been assigned. |
Admin Password | Allows you to set an admin password. |
System Password Status | Specifies whether a system password has been assigned. |
System Password | Allows you to set a system password. |
Password on Boot | Enable or disable authentication every time your computer |
| boots. |
Password Bypass | Allows you to bypass the system and hard drive |
| passwords when your computer restarts.However, you |
| must enter the passwords if you are turning the computer |
| on from the shutdown state. |
Password Change | Enable or disable the password change feature. |
Computrace option | Enable or disable the Computrace feature on your |
| computer. |
HDD Security Configuration | Allows you to set a password on the computer's internal |
| hard drive (HDD). The hard drive password is enabled |
| even when the hard drive is installed on another |
| computer. |
Boot
The Boot tab allows you to change the boot sequence.
64
