DeLonghi D14427DZ manual Important Safeguard, Description, Thermal Cut-Out Device, Instructions

IMPORTANT SAFEGUARD

A DEEP FRYER FALLING FROM A HIGH PLACE MAY KEEP OUT OF REACH OF CHILDREN CAUSE SERIOUS BURNS. NEVER LEAVE THE CORD

HANGING FROM THE EDGE OF THE SURFACE THE DEEP FRYER IS RESTING ON WHERE IT COULD BE GRASPED BY A CHILD OR GET IN THE WAY OF THE

USER. DO NOT USE EXTENSIONS CORD.

DESCRIPTION

A.	Display	M.	Handle
B.	“-/+” buttons to increase/decrease time and	N.	Control unit guides
	temperature	O.	Cover with handle
C.	MODE button to select time/temperature modes	P.	Viewing window
D.	START/STOP on/off button	Q.	Filter (if present)
E.	Red "ON" light	A.	Removable bowl
F.	Green "at temperature" light	S.	Basket with folding handle
G.	Safety microswitch	T.	Heating element
H.	Min/max oil level indicator	U.	Guides for attaching the control unit
I.	Basket support	V.	Cord storage compartment
L.	Casing	Z.	Thermal cut-out device reset button

THERMAL CUT-OUT DEVICE

The appliance is fitted with a thermal cut-out device which interrupts heating in the event of incorrect use or faulty operation. Once the appliance has cooled down, use a toothpick to delicately press the thermal cut- out device reset button (Z) (see fig. 1). If the appliance is still not operational, contact a service center autho- rized by the manufacturer.

INSTRUCTIONS

Before using the deep fryer for the first time, clean the basket, bowl and cover thoroughly with hot water and detergent. The control unit with power cord and heating element can be cleaned with a damp cloth. Check that water does not enter into the control unit and that there is no water left in the bottom of the removable bowl. Dry all parts thoroughly.

Make sure the control unit is correctly fastened to the deep fryer body. The safety micro-switch (G) will pre- vent the appliance from operating unless the control unit is correctly positioned in the guides (N).

The deep fryer is now ready for use.

FILLING WITH OIL OR FAT

•Remove the cover (O), lifting it by the handle. Turn the basket handle until it locks into place (pos. 2, fig. 2). Remove the basket (S) by pulling upwards.

•From the cord storage (V), pull out the length of cord required to connect the appliance to the outlet (see

6