GB
ELECTRONIC MODEL
Increase humidity
level button
ON/OFF
Operation
Room temperature knob
°F/ °C
FAN 
button
button
Full Tank light | Display | Decrease | MODE button |
ON/OFF button |
| humidity level |
|
| button |
| |
|
|
|
Press this button to start /stop the appliance. The compressor will respond to the modified humidity setting 3 minutes after the unit is switched on.
MODE button 
Press this button to select the Fan only or Dehumidifier modes.
Room temperature knob 
Press this button to display the Temperature or Humidity reading on the LCD display. If you press the button once the display will show the °F . If you press the button twice, the display will show the temperature in °C. After few seconds, the display will automatically show the humidity level.
FAN button
Press this button to select the High Fan Speed or Low Fan Speed settings.,
Press this button to increase the humidity level by 5% up to a limit of 80%RH.
Press this button to reduce the humidity level by 5%up to a limit of 30%RH. When the unit is in continuous operation the LCD screen will display two dashes.
NOTE: If the set humidity level is higher than the level in the room, the compressor will stop working, although the fan continues.
The default humidity setting is 60%RH
6