Replacing the Inner Pane of Glass
1.Make sure the door is locked open
(see fig. 25c).
2.Replace the inner pane:
■■ Check that the four rubber pads are in place (“D” in Fig. 27a).
■■ Check that you are holding the pane the correct way. You should be able to read the wording on it as it faces you.
■■ Insert the pane in the left “E” and right “F” slide guides (fig. 27b), and gently slide it to the retainers “H” (fig. 27c).
■■ Reassemble the seal “G” in the correct way by hooking the no. 3 fixing hooks in the proper holes (fig. 27d).
■■ Unlock the oven door by opening it completely and closing the lever “A” on the left and right hinges (Fig. 27e).
D |
Figure 27a |
E |
F |
Figure 27b
Figure 27c |
H |
The oven door has a sealed gasket in the top part.
It is normal the opened gap between the top edge of the inner glass and the sealed gasket. This allows the cooling air circulation.
G |
Figure 27d |
A |
Figure 27e
31
