DeLonghi DE 60 GW REASSEMBLING THE INNER PANE, Figure 52, Figure 54, Figure 48, Figure 49, Figure 50, Figure 51, Figure 53

41
REASSEMBLING THE INNER PANE
To reassemble the inner pane of the
oven door operate as follows:
– Make sure the door is locked open
(see Fig. 45).
– Check the correct positioning of the
no. 4 (four) silicon rubbers D(fig. 48).
– Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
– Insert the inner pane in the left E and
right Fside guides (fig. 49) and gen-
tly let it slide up to the retainers H(fig.
50).
– Reassemble the seal G in the correct
way (fig. 51) by hooking the no. 3 fix-
ing hooks in the proper holes (fig. 52).
– Open completely the oven door and
close the lever Aon the left and right
hinges (fig. 54).
A
It is normal the opened gap between the
top edge of the inner glass and the sealed
gasket. This allows the cooling air
circulation
The oven door
has a sealed
gasket in the
top part.
D
Figure 52
Figure 48
E
F
Figure 51
H
Figure 50
Figure 49
D
E
F
H
G
Figure 53
Figure 54