DeLonghi EAM3500 manual Reset To Default No, Changing The Language

Models: EAM3500

1 23
Download 23 pages 30.93 Kb
Page 20
Image 20
RESET TO DEFAULT NO

16.7 Resetting factory default settings (reset)

If you change the original values, the factory default values can be reset as follows:

• Press the

button then press

repeatedly until the appliance displays:

RESET TO DEFAULT NO

Press the 17 CHANGING THE LANGUAGE18 MEANING OF MESSAGE DISPLAYED AND WHAT TO DOManual backgroundManual backgroundManual backgroundManual background button and the appliance displays "RESET TO DEFAULT YES:

Press the Manual backgroundManual background button to reset the factory default values;

The appliance is now reset to the factory default settings and the READY message is displayed. 16.8 Washing process

This function can be used by technical service personnel only.

17 CHANGING THE LANGUAGE

To change the language, press the Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background button for at least 5 seconds until the appliance displays the installation message in various languages. To select the required language, follow the instructions in section

4.1 :

18 MEANING OF MESSAGE DISPLAYED AND WHAT TO DO

 

MESSAGE

 

MEANING

 

WHAT TO DO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The water tank is empty or is positioned

 

• Fill the water tank as described in sec-

 

 

 

 

 

 

 

 

incorrectly.

 

tion 6, note 6 and insert it fully.

 

 

FILL TANK

The tank is dirty or encrusted with lime

 

• Rinse or descale the tank.

 

 

 

 

scale.

 

 

 

 

 

 

 

 

 

 

 

GROUND TOO FINE ADJUST MILL

The appliance cannot make coffee

 

• Insert the hot water spout, press the

 

 

AND

 

 

 

button and run off water from the spout

 

 

 

 

 

for a few seconds.

 

 

INSERT WATER SPOUT AND

The coffee runs off too slowly.

 

• Turn the grinding regulator (fig. 12) one

 

 

PRESS OK

 

 

 

click clockwise (see section 8).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• The grounds container is full or missing.

 

• Empty the grounds container and clean

 

 

EMPTY GROUNDS CONTAINER

 

 

 

as described in section 6, note 7, then

 

 

 

 

 

 

replace.

 

 

 

 

 

 

 

 

 

 

After cleaning, the grounds container

 

• Open the service door and insert the

 

 

INSERT GROUNDS CONTAINER

 

has not been replaced.

 

grounds container.

 

 

 

 

 

 

 

 

 

ADD PRE-GROUND

With the function selected, the pre-

 

• Add the ground coffee as described in

 

 

COFFEE

 

ground coffee has not been poured into

 

section 9.

 

 

 

the funnel.

 

 

 

 

 

 

 

 

 

 

 

• The coffee beans have run out.

 

• Fill bean container.

 

 

 

• If the coffee grinder is very noisy, this

 

• Contact an authorized De' Longhi servi-

 

 

FILL BEANS CONTAINER

 

means a small stone in the coffee beans

 

ce center.

 

 

 

 

has blocked the mill.

 

 

 

 

 

 

 

 

 

 

 

• This indicates the presence of lime scale

 

• The descaling procedure, described in

 

 

DESCALE

 

in the appliance.

 

section 16.3, needs to be performed as

 

 

 

 

 

 

soon as possible.

 

 

 

 

 

 

 

 

20

Page 20
Image 20
DeLonghi EAM3500 manual Reset To Default No, Changing The Language, Meaning Of Message Displayed And What To Do