HOW TO USE THE TIMER
Please refer to the illustration below:
|
|
| 2 |
|
|
|
| 11 | 10 | 9 | 8 |
| 1 |
|
|
| |
| 2 |
|
|
|
|
1 | 13 |
|
|
| 7 |
14 |
|
|
| 6 | |
| 5 |
|
|
| 5 |
| 1 |
|
|
|
|
| 16 |
|
|
| 4 |
| 1 |
|
|
| 3 |
| 7 |
|
|
|
|
| 18 |
|
|
| 2 |
| 19 |
|
|
| 1 |
| 02 |
|
|
| 2 |
| 12 | 22 | 32 | 4 | |
|
|
|
| 1 |
|
|
|
|
|
|
|
|
| 1 | 24 |
|
| 2 |
3 | 3 | 2 | 23 |
|
| ||
|
|
|
|
| |||
4 |
|
|
| 22 |
|
| |
| 5 |
|
|
| 2 |
| |
|
|
|
|
| 1 |
| |
| 6 |
|
|
|
| 2 |
|
|
|
|
|
| 0 |
| |
| 7 |
|
|
|
| 19 | 3 |
|
|
|
|
|
| 1 | |
| 8 |
|
|
|
|
| |
|
|
|
|
|
| 8 |
|
| 9 |
|
|
| 7 | 1 |
|
|
|
|
|
|
|
| |
| 10 |
|
|
| 1 |
|
|
|
|
|
| 6 |
|
| |
| 11 |
|
|
| 5 |
|
|
|
| 21 |
|
| 1 |
|
|
|
| 31 | 1 |
|
|
| |
|
| 4 |
|
|
| ||
IMPORTANT: There are 96 tabs around the dial. Each tab represents a 1/4 hour (15 minutes) and there is a tab for each quarter hour of the day (24 hours). Your appliance can be programmed to switch itself ON and OFF at the time of your choice. With a timer you can approximate your set- ting to within 15 minutes and program up to 48 cycles (1 cycle = 1 “ON” + 1 “OFF”) over a period of 24 hours (12 hours a.m.+12 hours p.m.).
The tabs can be pushed inwards or pulled outwards simply by using your fingers. When a tab is in the inward position (towards the center of the dial), the heater will be on during the corresponding 15 minute period. If a tab is in the outward position, the heater will be off during that period.
Please note that when you first use your heater all the tabs are out. You must push in the tabs that correspond to the period when you want the heater to be on. (If you want to bypass the timer you must push all 96 tabs inward.)
Timer operation
A)Plug in the heater.
B)Turn timer dial clockwise to set clock with the current time of day (see CLOCK SETTING).
C)Push tabs inwards for the period you want the heater to operate. For example, in the shown illustration, the heater will operate from 14.00 (2 p.m.) to 16.30 (4.30 p.m.) and from 4.45 a.m. to 5 a.m.
D)Push
E)Once you have set the tabs for the desired heating periods, your heater will cycle on and off according to these settings.
F)As long as you keep the heater plugged in, the timer will maintain the proper time.
A safety device
A safety device switches the heater off in the event of everheating. To restart the heater, call the nearest Service center.
6. MAINTENANCE AND SERVICE
Always unplug the heater from the power outlet and allow the radiator to cool. Wipe radiator with a soft damp cloth; do not use detergents and abrasives.
Should the radiator not be in use over a certain length of time, roll the cable around the holder and store it in a dry place (see fig. on front page).
This appliance has been built to last for many years of
In case of malfunction or doubt, do not try to repair the heater by yourself: this might increase the risk of fire and electric shock.
Call nearest Service Center Visit www.delonghi.com for a completelist of Service Centers (U.S. Only).
5
