DeLonghi EW7707CBM manual Location, Connection, Turning On, Use Of Thermostat, Antifreeze function

1. LOCATION

Place the heater on the floor beneath the coldest window in the room, or any other location. Your heater will reduce the effect of cold drafts. The heater should not be placed immediately below a power outlet. Do not use this radiator in rooms with a floor area of less than 43 square feet (4 sq. m.).

2. CONNECTION

The radiator should be connected to a properly polarized household outlet in perfect working condition. Keep loose clothing or bedding, furniture and flammable material away from the heater’s wall outlet.

3. TURNING ON

Turn the thermostat clockwise to its maximum position. Push down both switches. (The switch lights stay on independen- tly of the thermostat cycling). When room reaches the desired temperature, turn the thermostat knob counter-clockwise very slowly and carefully until you hear a click. This should set your heater to maintain the current temperature by cycling on and off as required.

4. USE OF THERMOSTAT

The thermostat operates according to room air temperature, rather than radiator temperature. Turning it counter-clockwi- se to smaller numbers would decrease the temperature; clockwise to greater numbers would increase the temperature.

Antifreeze function

Turn the thermostat dial to the position and push both switches on. The appliance will maintain a minimum room tem- perature of approximately 5°C, thus preventing freezing while conserving energy.

REMINDER

To completely shut the heater off, ON/OFF both switches must be set in the OFF position.

5. COMFORTEMP FUNCTION

With both switches on and the COMFORTEMP button depressed the appliance is automatically set to reach and maintain the suggested & preset ideal energy-saving temperature. When operating in COMFORTEMP mode, the half-circle green pilot light is on. To quit the COMFORTEMP function and return to manual operation, depress the COMFORTEMP button once again.

A safety device

A safety device switches the heater off in the event of overheating. To restart the heater, call the nearest Service center.

6. MAINTENANCE AND SERVICE
Always unplug the heater from the power outlet and allow the radiator to cool.
Wipe radiator with a soft damp cloth; do not use detergents and abrasives. Should
the radiator not be in use over a certain length of time, roll the cable around the
holder and store it in a dry place.
This appliance has been built to last for many years of trouble-free service. In case
of malfunction or doubt, do not try to repair the heater by yourself: this might	GREEN
increase the risk of fire and electric shock. Call nearest Service Center for a comple-
	PILOT
te list of Service Centers (U.S. Only).

LIGHT

COMFORTEMP

BUTTON

4