Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). There is only one way it can be plugged into a power supply. This is a safety feature. If you are unable to insert the plug fully into the outlet, try again by turning it the other way. If it would still not go in, it is probably due to an obsolete outlet which should be replaced. Do not tamper with the plug or outlet to defeat the purpose of this safety mechanism.
TROUBLESHOOTING
PROBLEM | CAUSE | SOLUTION |
|
|
|
The appliance doesn’t work | • Be sure it is plugged in and that the electri- | • Plug into the mains. |
cal outlet is working. |
| |
|
| |
| • Check for any obstruction. | • Remove the obstruction. Let the |
|
| appliance cool down then reinsert the |
|
| plug into the mains. If the appliance |
|
| doesn’t work please contact the nearest |
|
| service center. |
| • The switches are in the OFF position. | • Switch on the appliance. |
| • The thermostat may be set too low. | • Turn the thermostat to a higher setting |
|
| until the heater restarts. |
|
|
|
5
