DeLonghi F455 CZ manual Installation, Thermal safety device, Using the fryer, fig. fig

F455UK 5-09-2003 9:19 Pagina 3

Thank you for choosing this deep fryer.To get the best results from your deep fryer it is advisable to read these instructions before using the appliance. This is the only way to ensure optimum results and maximum safety.

Installation

•Before use, check that the appliance has not been damaged during transport.

•Remove the appliance from the packaging, including any p.o.s.

•Before use, check that the power supply voltage corresponds to the value shown on the appliance rating plate.The appliance must always be connected to a well earthed socket rated at 10A minimum.The manufacturer is not liable for damage caused by inadequate earthing of the appliance.

•Before using the deep fryer for the first time, carefully clean the basket, the bowl, the casing and the lid, using warm water and dish- washing detergent. The control unit, power cable and heating ele- ment may be cleaned using a damp cloth. Check that water does not enter into the control unit and that there is no residual water in the bottom of the removable bowl. Carefully dry all the parts.

•Check that the control unit is properly fastened to the deep fryer body.The safety micro-switch will not allow the appliance to be operated if the control unit is not correctly positioned in the casing.

•Place the fryer on a flat work surface at a safe distance from taps and sinks.

•The deep fryer is now ready for use.

fig. 1

fig. 2

Thermal safety device

The appliance is fitted with a thermal safety device that stops the appliance from heating in the event of incorrect use or irregular opera- tion. Once the appliance has cooled, using a toothpick or something similar, delicately press the safety device reset button marked RESET (see Fig. 1). If the appliance does not start operating again, contact a service centre authorised by the manufacturer.

Using the fryer

•Remove the lid lifting it by the handle.Turn the folding handle of the basket until it locks into place (pos. 2, Fig. 2). Remove the basket by lifting it upwards.

•Remove the length of cable required to connect the appliance to the mains, from the cable compartment (see Fig. 3).

•Pour 4 litres of oil into the bowl until reaching the maximum level indicated (see Fig. 4). For best results, use good quality oil. Avoid mixing different types of oil.

If using lumps of solid fat, cut them into small pieces so that the deep

fig. 3

MAX

level

fig. 4

NO!

fig. 5

3Electric Deep Fryer F455CZ