Thank you for choosing this De’Longhi radiator. To get the very best out of your new radiator it is advisable to read these instructions before using it.This will ensure that you gain optimum results and use the appliance safely.
General instructions
Take the radiator out of its packing box and remove any poly- styrene pieces or any other packaging material that might be lodged inside it.
Make sure that the radiator has not been damaged during transit and that the mains cable is in working order. Do not operate the radiator if damaged.
“Easy wheel”system
Turn the radiator
Fig.1
Electrical connection
-Before plugging the radiator into the mains, check that your supply voltage is the same as that shown on the rating plate of the radiator.
-If using more than one appliance at a time, it is important to ensure that the ring main is adequate to cope with the power requirements.
-It is important to ensure that the socket is adequately earthed.
-This radiator complies with EEC Directive 89/336 relating to electromagnetic compatibility.
How to use it
Switching on
Plug the radiator in; position the thermostat slider to maximum and turn the radiator on as follows using the power selector:
•Turn the power selector to position 1 to select minimum out- put (the light on the left will come on).
•Turn the power selector to position 2 to select medium output (the light on the right will come on).
•Turn the power selector to position 3 to select maximum out- put (both lights will come on).
Adjusting the thermostat
Leave the thermostat at its highest setting until the room has reached the required temperature.Then slowly turn the ther- mostat slider back until you hear a click.The temperature selected in this way will then be regulated automatically and kept constant by the thermostat.
Dragon HM3
2
