Thank you for choosing this De’Longhi citrus press. To get the best results from your new citrus press it is advisable to read these instructions carefully before using the appliance.

This is the only way to ensure optimum results and maximum safety.

Using for the first time

•Before use, check that the appliance has not been damaged dur- ing transport.

•Remove all packaging from the citrus press.

•Check that the voltage of the electrical socket corresponds to the voltage indicated on the label on the appliance. Before using the appliance for the first time, carefully wash and dry the fruit dome, filter, container and non-drip spout

Assembling the appliance

Assemble the appliance as follows:

1.Insert the two ends of the juicing lever into the guides (fig. 1).

2.Make sure the juicing lever is mounted correctly by raising and lowering the lever.

3.Insert the cover into the lever ring and push as far as it will go, making sure the tab on the ring fits into the hole in the cover (fig. 2).

At this point, the appliance is ready for juicing.

Before use

Before using the machine for the first time, wash all the accessories (dust cover, fruit dome, top filter, bottom filter, pulp density selector, internal juice container, non-drip spout) in warm soapy water and rinse.

fig.1

fig.2

Use

•Place the container on the motor base.

•Fit the bottom filter and top filter.

•Place the filter assembly on the motor base , making sure the pulp density selector is positioned in the hollow in the motor base (fig. 3).

•Fit the fruit dome onto the motor shaft.

•Place a glass under the non-drip spout and move the spout downwards (fig. 4).

•Plug into the mains.

•Cut the citrus fruit in half.

•Place half a fruit onto the fruit dome and lower the cover by pushing the juicing lever down and pressing lightly.

The motor is designed to rotate in either direction to optimise the juicing effect; press the juicing lever intermittently the motor will reverse its rotational direction.

Fig.3

Fig.4

3

Citrus juicer KS3000