Fig.5
Fig.6
NB: the pulp density selector enables the quantity of pulp in the juice to be regulated by making the holes in the filter smaller or larger.
To reduce the amount of pulp, move the juice density selector left as far as it will go.To increase the quantity of pulp, move the selector to the opposite side (fig. 5).
Important: never use the appliance continuously for more than four minutes.
•When you have finished juicing, to reduce drips, move the non- drip spout to the raised position (fig. 6).
Cleaning and maintenance
•This appliance should not require any maintenance. However, before attempting to clean the appliance, unplug from the mains socket.
•Remove the filters, dome and juice container by pulling upwards.
•Remove all waste and clean the components.
•To avoid residues drying on, take the appliance to pieces and clean the components immediately after use.
•Wash the juice container, filters, cone and cover in warm water and detergent. None of the components can be washed in a dishwasher.
•Clean the motor base with a damp cloth.
NB: to facilitate cleaning, the
Safety Warnings
Please read these instructions before operating and retain for future reference.
•After having removed the appliance from the packaging, make sure that it has all of its components. If there is any doubt, do not use the appliance and return it to be checked by qualified personnel.
•The plastic bag containing the appliance should be kept away from children as it may represent a suffocation hazard.
•In the case that the plug is not compatible with the electrical outlet being used, have it substituted with a suitable one by qualified personnel. The use of adapters,
•Should the appliance stop working, go to an authorised service centre.
Citrus juicer KS3000 | 4 |