SAINT
Keyword 2000 to
01/20/04
Page 16 of 20
5.3Flash programming connector
Note: the long term goal is to Flash using the USB connector.
Connector J2 is used with an external connector – the intended application of this port is the flash programming of a product. The pin out of the connector J2 – flash programming connectior - is as follows:
Pin # | Mnemonic | Use / description |
Line up the connector label with the | Osc1 | External (to SAINT) oscillator |
board pin label. |
|
|
| Osc2 | External (to SAINT) oscillator |
| Vdd | Already connected to +5V on |
|
| SAINT board |
| Vss | Already grounded |
