Note that the "Line Out Level" cannot be reset while the receiver is in the Delphi Audio System since the volume control should be used to control the audio output instead. If the line out setting is adjusted while in a car cradle or home stand and the receiver is later reconnected to the Delphi Audio System, it will automatically return to the prior setting the next time it is used in a vehicle adaptor or home adaptor.
Bass 8c Treble
Bass and treble can be adjusted by pressing the "Menu" button, selecting "Bass + Treble", and then setting them in the same manner as other menu functions.
This feature only appears and only applies when the receiver is seated in the Delphi Audio System. If the receiver is removed and used in a vehicle adaptor or home adaptor, the bass and treble settings out of the receiver will be "flat" or "zero" since the audio signal will be processed by the vehicle or home audio sys- tems. When the receiver is returned to the Delphi Audio System, it will return to the previously used bass and treble settings.
Headphones
The Delphi Audio System has a headphone jack conveniently located next to the volume control on the front of the unit. Many popular styles and types of headphones or earbuds can be used as long as their plugs and/or adaptors fit the industry standard 3.5 mm diameter stereo jack.
A Warning: Hearing damage from loud noise is almost undetectable until it is too late. Your hearing can adapt to higher volumes of sound. Sound that seems normal can be loud and harmful to your hearing. Take precautions by adjusting the volume control on your audio system to a safe sound level before your hearing adapts to it.
To help avoid hearing loss or damage, do the following:
1.Adjust the volume control to the lowest setting.
2.Increase volume slowly until you hear comfortably and clearly.
1.On power sources:
•For AC operation, it is recommended that only the supplied AC power adaptor is used. If you need to use another one, make sure it is a 12V, 1500mA DC adaptor with a unified
•The satellite radio receiver is not disconnected from the AC power source (mains] as long as it is connected to the wall outlet, even if the satellite radio receiver has been turned off or detached.
•Unplug the AC power adaptor from the wall outlet when it is not used for an extended period of time.
•For battery operation, use six "0" size (R20] batteries.
•The icon indicating operating voltage, power consumption, etc. is located next to the power jack on the rea r cover.
Caution: When the batteries are not being used, remove them to avoid possible damage that can be caused by battery leakage or corrosion.
9
