TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

2

safety guidelines - definitions

3

GENERAL SAFETY RULES

3

ADDITIONAL SPECIFIC SAFETY RULES

4

Power Connections

6

Motor Specifications

6

Grounding Instructions

6

Extension Cords

7

KEY Features and Components

7

Functional Description

7

Product Specifications

8

Unpacking

8

Assembly

9

Attach Spark Shield and Grinding Shield

9

Attach Tool Rest

9

Tool Storage

10

Confirm Tightness of Arbor Nuts

10

Operation

11

Starting And Stopping

11

Locking the Machine

11

Using the Variable Speed Control

11

Using the Flexible Lamp

11

Maintenance

 

Grinding Wheels

12

Dressing the Wheels

12

Replacing or Changing Grinding Wheels

13

Other Recommended Maintenance

13

Accessories

14

Warranty

14

Replacement Parts

15

Service and Repairs

15

FranÇais

16

ESPAÑOL

30

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below, may result in electric shock, fire,

and/or serious personal injury or property damage.

Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there are certain hazards involved with the operation of the product. Using the machine with respect and caution will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator may result. Safety equipment such

as guards, push sticks, hold-downs, featherboards, goggles, dust masks and hearing protection can reduce your potential for injury. But even the best guard won’t make up for poor judgment, carelessness or inattention. Always use common sense and exercise caution in the workshop. If a procedure feels dangerous, don’t try it. Figure out an alternative procedure that feels safer. REMEMBER: Your personal safety is your responsibility. For additional information please visit our website www.DeltaMachinery.com.

This machine was designed for certain applications only. DELTA® Power Equipment Corporation strongly recommends that this machine not be modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the

machine until you have first contacted DELTA® to determine if it can or should be performed on the product.

If you have any questions relative to its application DO NOT use the product until you have written DELTA® Power Equipment Corporation and we have advised you. Contact us online at www.DeltaMachinery.com or by mail at Technical Service Manager, DELTA® Power Equipment Corporation, 4825 Highway 45 North, Jackson, TN 38305.

Information regarding the safe and proper operation of this tool is available from the following sources:

Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.com

National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201

American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1 Safety Requirements for Woodworking Machines

U.S. Department of Labor regulations www.osha.gov

2

Page 2
Image 2
Delta 23-199, 23-198 instruction manual Table of Contents, Important Safety Instructions

23-199, 23-198 specifications

Delta 23-198 and Delta 23-199 are two advanced models in the Delta aircraft series, known for their cutting-edge features, technologies, and impressive performance characteristics. Designed with modern aviation demands in mind, these aircraft aim to enhance both passenger experience and operational efficiency.

One of the standout features of the Delta 23-198 and 23-199 is their aerodynamic design, which significantly reduces drag and improves fuel efficiency. The sleek fuselage, coupled with advanced wing designs, ensures optimal performance across various flight conditions. These aircraft are equipped with next-generation engines that provide greater thrust while consuming less fuel, making them highly competitive in today’s market.

Both models are constructed using lightweight composite materials, which not only contribute to overall weight reduction but also enhance structural integrity. This innovative material usage allows for higher payload capacity and longer range, making them ideal for both short-haul and long-haul operations.

In terms of cabin comfort, Delta 23-198 and 23-199 feature spacious interiors with a focus on passenger experience. Larger windows and improved cabin pressure systems create a more pleasant atmosphere, reducing fatigue during long flights. The aircraft's seating layout has been optimized to maximize comfort, with options for various classes to cater to different passenger needs.

Technologically, these models incorporate advanced avionics systems that enhance navigation and safety. The flight deck is equipped with state-of-the-art displays and automated systems that aid pilots in decision-making and improve overall situational awareness. Additionally, real-time data analytics tools are integrated into the aircraft’s operations, allowing for predictive maintenance and operational optimization.

Both aircraft are designed with sustainability in mind. They meet stringent environmental regulations and are equipped with systems that minimize noise pollution and emissions. This commitment to greener aviation technology positions Delta 23-198 and 23-199 as responsible choices for airlines looking to reduce their carbon footprint.

In summary, Delta 23-198 and 23-199 exemplify the future of aviation with their combination of efficiency, comfort, and advanced technology. Their ability to meet the evolving demands of the aviation industry while prioritizing sustainability makes them significant players in the aircraft market. Airlines looking to enhance their fleet will find that these models offer a compelling mix of performance and passenger satisfaction.