ASSEMBLY

ASSEMBLING TOOL RESTS

1.Assemble the v-grooved tool rest (A) Fig. 3, to the inside of the right wheel guard using two 5/16-18x5/8" hex head screws (B), and 3/4" flat washers (C).

2.Assemble the remaining flat surfaced tool rest (D) Fig. 4, to the inside of the left wheel guard in the same manner using two 5/16-18x1/2" hex head screws (E), and 3/4" flat washers (C).

3.Each tool rest is adjustable so that the edge (F) Fig. 4, of the tool rest can be positioned as close to the grinding wheel (G) as possible giving maximum support to the piece that is being ground. A distance of 1/8" or less between the grinding wheel (G) and the edge (F) of the tool rest should always be maintained. As the grinding wheel wears down to a smaller diameter, re- adjust the tool rest closer to the wheel. The tool rest should be adjusted so it is set a little below the center of the wheel. This is the most practical and safest position for general work. Free-hand grinding without the use of the tool rest should always be done on the lower quarter of the wheel.

ASSEMBLING

SPARK GUARDS

The spark guard (A) Fig. 5, is mounted to the side of each wheel guard, using the 1/4-20x1/4" hex head screw (B) and 11/16" flat washer (C) as shown. The spark guard (A) should be adjusted as close as possible to the grinding wheel so that sparks never strike the operator’s hand. As the wheels wear down, the spark guard (A) should be adjusted accordingly.

ASSEMBLING EYE SHIELDS

Your grinder is supplied with two safety eye shields for operator protection. NOTE: ALWAYS WEAR EYE PRO- TECTION. To assemble the eye shields, proceed as follows:

1.Place shield (A) Fig. 6, under the lip of frame (B). Align the two holes in the shield with the two holes in the frame and fasten together using two #10-24x1/2" round head screws (C),15/32" flat washers (D), and #10-24 nuts

(E). Assemble the other shield in the same manner.

C

B

A

C

A

B

Fig. 3

G

F

C

D

E

Fig. 4

C

E D

B

D E

A

Fig. 5

Fig. 6

6

Page 5 Page 7
Page 6
Image 6
Delta 23-645, 23-640 instruction manual Assembly, Assembling Tool Rests, Assembling Spark Guards, Assembling EYE Shields
Page 5 Page 7

23-640, 23-645 specifications

Delta 23-645 and Delta 23-640 are advanced technology solutions developed to meet the demands of modern industries requiring high performance and reliability. Both models are engineered to serve various applications, from manufacturing to logistics, and are designed with cutting-edge features that enhance efficiency and productivity.

The Delta 23-645 boasts a robust architecture, allowing for superior load handling capacity, making it an ideal choice for heavy-duty tasks. This model is equipped with a highly efficient motor system that not only maximizes output but also minimizes energy consumption. With its user-friendly interface, operators can easily navigate through various functions, ensuring a seamless operation in fast-paced environments.

Meanwhile, the Delta 23-640 is designed with a focus on flexibility and adaptability. It is engineered to integrate smoothly with existing systems, allowing for seamless upgrades in technology without complete overhauls. This model features an intelligent control system that leverages machine learning algorithms to optimize performance based on real-time data analysis. The Delta 23-640 is particularly well-suited for industries where quick adjustments to production lines are necessary, further enhancing operational efficiency.

Both models are built with durability in mind, utilizing high-grade materials that withstand wear and tear in challenging environments. They come equipped with advanced safety features, including automated shut-off systems and real-time monitoring, ensuring operators are protected while maximizing uptime and productivity.

Connectivity is another key benefit of the Delta 23-645 and Delta 23-640. They support a range of communication protocols, allowing them to be integrated into various Internet of Things (IoT) frameworks. This connectivity enables businesses to monitor equipment remotely, gather analytical data, and implement predictive maintenance strategies to prevent unexpected downtime.

In conclusion, the Delta 23-645 and Delta 23-640 represent the convergence of innovation and engineering excellence. With their unique features, advanced technologies, and rugged designs, these models are set to redefine operational standards across multiple sectors, enabling businesses to thrive in an increasingly competitive landscape. Companies looking to enhance their operational capabilities will find these solutions to be invaluable assets.
Top Page Image Contents