UNPACKING
1.Remove the miter saw and all loose items from the carton. IMPORTANT: DO NOT LIFT THE MITER SAW
BY THE SWITCH HANDLE AS THIS MAY CAUSE MIS- ALIGNMENT. ALWAYS LIFT THE MACHINE BY THE BASE OR CARRYING HANDLE. Fig. 2, illustrates the machine and all loose items after they have been removed from the carton.
1- Miter Saw
2- Wrenches for changing the blade
3- Table lock handle
1
3
2
Fig. 2
ASSEMBLY INSTRUCTIONS
WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MITER SAW TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDERSTOOD THE ENTIRE OWNERS MANUAL.
MOVING CUTTERHEAD | A | |
B | ||
TO THE UP POSITION | ||
|
1.Push down on switch handle (A) Fig. 3, and pull out cuttinghead lockpin (B).
Fig. 3
2.The cuttinghead (C) can then be moved to the up position, as shown in Fig. 4.
C
Fig. 4
4
