ASSEMBLING STAND (FOR MODEL 36-560 ONLY)

1. Assemble the stand as shown in Fig. 36, using 16

carriage bolts, flat washers and hex nuts. Do not

completely tighten the hardware at this time. Letters are

stamped on the stand brackets for ease in assembly.

A - Top front and rear brackets

B - Top side brackets

A

B

C

B

C

C - Bottom side brackets

D - Bottom front and rear brackets

IMPORTANT: The top front and rear brackets (A) Fig. 36,

are longer than the top side brackets (B) Fig. 36. The

bottom front and rear brackets (D) Fig. 36, are longer

than the bottom side brackets (C).

2. Assemble the rubber feet (E) Fig. 36, to the bottom of

each leg (F) as shown. NOTE: Each rubber foot is

provided with holes for mounting the stand to the floor

surface if required.

ASSEMBLING SAW TO STAND

(FOR MODEL 36-560 ONLY)

1.Position the saw on the stand as shown in Fig. 37. Align the holes in the front and rear of the saw with the holes in the top of the stand and loosely fasten the saw to the stand with four 16MM hex head screws, eight flat washers and four hex nuts supplied

2.Push down on top of the saw so the legs of the stand adjust to the surface of the floor and tighten all stand hardware and hardware which secures saw to stand.

FASTENING SAW TO A SUPPORTING SURFACE

The saw MUST be properly secured to a supporting surface using the four mounting holes, two of which are shown at (A) Fig. 38.

CAUTION: THE SUPPORTING SURFACE MUST BE ABLE TO SUPPORT 300LBS.

IMPORTANT: A HOLE MUST BE PROVIDED IN THE SUPPORTING SURFACE TO FACILITATE SAWDUST FALL-THRU AND REMOVAL. Square the saw on the supporting surface and mark the location of the four 5/16 inch holes to be drilled, as shown in Fig. 39. Locate and mark an 11 or 12 inch square centered between the four mounting holes and cut out and remove the square, as shown in Fig. 39. This opening will allow sawdust to fall through the saw base. Fasten the saw to the workbench utilizing the mounting holes that were just drilled.

IMPORTANT: FAILURE TO PROVIDE THIS SAW DUST FALL-THRU AND REMOVAL HOLE WILL ALLOW SAW DUST TO BUILD-UP AROUND THE MOTOR WHICH MAY RESULT IN A FIRE HAZARD OR CAUSE MOTOR DAMAGE.

D

E

Fig. 36

Fig. 37

A

Fig. 38

SAW PLACEMENT

5/16" HOLES

MARKS

 

11" OR 12" SQUARE CUTOUT

Fig. 39

15

Page 14 Page 16
Page 15
Image 15
Delta 36-550, 36-560 w/stand) Assembling Stand for Model 36-560 only, Assembling SAW to Stand For Model 36-560 only
Page 14 Page 16

36-560 w/stand), 36-550 specifications

The Delta 36-550 and Delta 36-560 are versatile table saws designed for both amateur woodworkers and seasoned professionals. These tools stand out in the market due to their robust features, reliability, and precision cutting capabilities.

One of the prominent features of the Delta 36-550 and 36-560 is their powerful motor. Both models are equipped with a 15-amp motor that provides ample power to handle a variety of wood types, from softwoods to hard species. This makes them suitable for a wide range of cutting applications, whether for general woodworking projects or more intricate tasks.

Both models come with a 10-inch blade diameter, allowing for significant cutting depth and width. The 36-550 offers a maximum cutting depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees, while the 36-560 matches these specifications, ensuring that users have ample capacity for various wood thicknesses.

The precision fence system is another noteworthy characteristic. The exclusive Delta T2 tool-free fence system ensures smooth operation and accuracy, allowing woodworkers to make straight, clean cuts consistently. The fence is easy to adjust and locks securely, providing confidence during operation.

Safety is a crucial factor in woodworking, and both models incorporate several features to protect users. The blade guard system is transparent, allowing for visibility during cuts while providing necessary protection. Furthermore, the onboard storage for accessories, as well as a sturdy table design, facilitates a tidy workspace.

Both the Delta 36-550 and 36-560 come equipped with a heavy-duty steel stand, ensuring stability during use. The stand is designed for easy setup and provides a solid base, significantly reducing vibrations during operation. This characteristic enhances safety and improves overall cutting precision.

Additionally, both saws feature a dust port that connects to a vacuum system, promoting a clean working environment. Reducing dust not only keeps the workspace tidy but also improves visibility and safety during cutting operations.

In summary, the Delta 36-550 and 36-560 table saws combine power, precision, and safety into a robust package ideal for any woodworking enthusiast. With features like a reliable motor, precise fence system, enhanced safety protocols, and sturdy construction, these table saws stand out as excellent choices for anyone looking to elevate their woodworking projects.
Top Page Image Contents