OPERATING CONTROLS ON/OFF SWITCH

OPERATING CONTROLS ON/OFF SWITCH

M

The Air Cleaner is equipped with an in-line rocker switch

(M)Fig.11, located on the power cord (N). To start or stop the motor, press downward on the rocker switch.

NOTE: The switch has markings on the side to

N

determine the on/off position. We suggest that when

 

finished with the air cleaner, the switch be turned off

 

rather than unplugging the unit.

 

Fig. 11

OPERATIONS

1.NOTE: The air cleaner may produce a slight odor for the first couple hours of operation due to the protective coating which is applied to internal components. This odor will dissipate and should be disregarded.

IMPORTANT: Never operate the air cleaner without air filters in place.

2.Fig. 12 illustrates the air cleaner being used in bench- top sanding applications.

Fig. 12

3.Fig. 13 illustrates the air cleaner being used in circular saw applications.

4.Figs. 14 and 15 illustrate the air cleaner being used in dry wall and basement cleaning applications. CAUTION: We recommend that the air cleaner be clamped, as shown, if using sawhorses as a supporting surface.

Fig.13

Fig.14

Fig.15

9

Page 9
Image 9
Delta AP200 instruction manual Operating Controls On/Off Switch, Operations