ASSEMBLY

Tools Required for Assembly

1 - 9/16" socket or open end wrench

1 - electric drill

Unpacking

1.Remove all packaging.

It may be neces- sary to brace or

support one side of the outfit when removing the pallet because the air compressor will have a tendency to tip.

2.Remove and discard the (4) screws and washers holding the compressor to the pallet.

3.With the help of another person carefully remove air compressor from pallet and place on a level surface.

To Add Oil To Pump

Compressors are shipped without oil.

A small amount of oil may be pres- ent in the pump upon receipt of the air compressor. This is due to plant testing and does not mean the pump contains oil. Do not attempt to operate this air compressor without first adding oil to the crankcase. Serious damage can result from even limited operation unless filled with oil and broken in correctly. Make sure to closely fol- low initial start-up procedures.

Multi-Viscosity motor oils, like

10W 30, should not be used in an air compressor. They leave carbon deposits on critical components, thus reducing performance and compressor life. Use air compres- sor oil only.

1.Remove the oil drain plug (B) and washer (C).

2.Obtain the drain plug extension (D), from the parts bag.

A

C

B

3.Apply thread sealant tape to the threads of the drain plug exten- sion (D).

C

D B

4.Assemble the washer (C), drain plug extension (D), and drain plug (B) as shown in Figure.

5.Tighten securely.

6.Remove the oil fill plug (A.

7.Fill the crankcase with the rec- ommended oil. NOTE: Use an air compressor oil such as SAE-30 (API CG/CD heavy duty motor oil). Under extreme winter condi- tions use SAE-20 weight oil.

8.Replace the oil fill plug (A) and tighten securely.

9-ENG

D25235

Page 8 Page 10
Page 9
Image 9
Delta DLKC6580V2, D25235 029-2 instruction manual Tools Required for Assembly, Unpacking, To Add Oil To Pump
Page 8 Page 10

D25235 029-2, DLKC6580V2 specifications

Delta DLKC6580V2 and D25235 029-2 represent significant advancements in the realm of industrial automation and control systems. These products harness cutting-edge technology to enhance operational efficiency, reliability, and flexibility across various applications.

The Delta DLKC6580V2 is a highly versatile motion control system designed for precision and performance. It boasts a robust architecture that supports a wide range of servo motors, making it ideal for applications requiring fine-tuned movements. One of the standout features of the DLKC6580V2 is its advanced control algorithms, which enable smooth and accurate motion, minimizing vibrations and ensuring high-quality outputs. Additionally, its real-time processing capabilities allow for rapid response and adjustments during operation, which is crucial in high-speed manufacturing environments.

Another key feature of the DLKC6580V2 is its integrated communication options. It supports multiple industrial protocols, including EtherCAT and CANopen, allowing seamless integration with various controllers and devices within an industrial setup. This flexibility enhances the overall system configuration and reduces downtime during installation and maintenance.

On the other hand, the D25235 029-2 is an innovative industrial power supply unit known for its reliability and efficiency. The D25235 series is designed to provide stable power under varying load conditions, making it an essential component for uninterrupted operations in critical applications. Its high efficiency minimizes energy consumption, contributing to lower operational costs and a reduced carbon footprint.

The D25235 029-2 features advanced protection mechanisms that safeguard against surges, overloads, and short circuits, ensuring long-term durability and reliability. The compact design of the unit also facilitates easy integration into existing systems, providing users with considerable versatility in installation.

Both the DLKC6580V2 and D25235 029-2 excel in delivering user-friendly interfaces, simplifying operation and configuration. With intuitive software tools, operators can quickly set up, monitor, and adjust settings, enhancing overall productivity.

In conclusion, Delta’s DLKC6580V2 and D25235 029-2 represent the pinnacle of innovation in industrial control and power supply systems. Their advanced features, exceptional performance, and robust technologies make them indispensable tools for modern manufacturing processes, offering businesses the ability to achieve higher efficiency and reliability in their operations.
Top Page Image Contents