HOW to Clean the Water Inlet Filter, Remove ﬁlter by

HOW TO CLEAN THE WATER INLET FILTER

This screen ﬁlter should be checked periodically and cleaned if necessary.

1.	Remove ﬁlter by	Filter Screen
	grasping end and
	removing it from
	water inlet of pump
	as shown.
2.	Clean ﬁlter by ﬂushing it with
	water on both sides.
3.	Re-insert ﬁlter into water inlet
	of pump. NOTE: Cone side faces
	out.

NOTE: Do not operate pressure washer without ﬁlter properly installed.

1.Using a 1/8" hex head wrench loosen set screw in hub collar.

2.Slide hub collar from axle and remove the tire.

A09741

14- ENG

Image 14

Contents

For Parts, Service, Warranty or other Assistance Please call To learn more about Delta Machinery Important Safety Instructions Safety Guidelines DefinitionsConsumer Safety Information Risk of Explosion or Fire Risk to Fluid Injection Risk of Explosion or FireRisk to Breathing Risk of Chemical Burn Risk of Electrical Shock Risk of Unsafe Operation Risk of Injury from Spray Carton Contents To Assemble Quick Connect Nozzles Assembly InstructionsTo Assemble Quick Connect Grommets Choke Control Opens and closes carburetor choke valve Engine Switch Enables and disables ignition systemBasic Elements of a Pressure Washer Pressure Pressure AdjustmentsPressure Washer Terminology Regulator Nozzle Color Red Yellow White Black Read and Understand ALL Warnings Before Starting UnitTo USE Spray Wand Uses Hose onto HOW to Apply Chemicals and Cleaning SolventsTo Apply chemicals Press chemical Starting Shutting Down Engine Pump MaintenanceNozzle Cleaning Remove ﬁlter by HOW to Clean the Water Inlet FilterHOW to Remove the Wheels Re-insert ﬁlter into water inlet Storage Pressure Washer Causecorrection Trouble Shooting GuideProblem Problem Cause Correction Warranty